CVE-2022-50408 — linux / linux_kernel
Use After FreeIn the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
> ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb);
may be schedule, and then complete before the line
> ndev->stats.tx_bytes += skb->len;
[ 46.912801] ================================================================== [ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328 [ 46.935991] [ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[REDACTED] #1 [ 46.947255] Hardware name: [REDACTED] [ 46.954568] Call trace: [ 46.957037] dump_backtrace+0x0/0x2b8 [ 46.960719] show_stack+0x24/0x30 [ 46.964052] dump_stack+0x128/0x194 [ 46.967557] print_address_description.isra.0+0x64/0x380 [ 46.972877] __kasan_report+0x1d4/0x240 [ 46.976723] kasan_report+0xc/0x18 [ 46.980138] __asan_report_load4_noabort+0x18/0x20 [ 46.985027] brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.990613] dev_hard_start_xmit+0x1bc/0xda0 [ 46.994894] sch_direct_xmit+0x198/0xd08 [ 46.998827] __qdisc_run+0x37c/0x1dc0 [ 47.002500] __dev_queue_xmit+0x1528/0x21f8 [ 47.006692] dev_queue_xmit+0x24/0x30 [ 47.010366] neigh_resolve_output+0x37c/0x678 [ 47.014734] ip_finish_output2+0x598/0x2458 [ 47.018927] __ip_finish_output+0x300/0x730 [ 47.023118] ip_output+0x2e0/0x430 [ 47.026530] ip_local_out+0x90/0x140 [ 47.030117] igmpv3_sendpack+0x14c/0x228 [ 47.034049] igmpv3_send_cr+0x384/0x6b8 [ 47.037895] igmp_ifc_timer_expire+0x4c/0x118 [ 47.042262] call_timer_fn+0x1cc/0xbe8 [ 47.046021] __run_timers+0x4d8/0xb28 [ 47.049693] run_timer_softirq+0x24/0x40 [ 47.053626] __do_softirq+0x2c0/0x117c [ 47.057387] irq_exit+0x2dc/0x388 [ 47.060715] __handle_domain_irq+0xb4/0x158 [ 47.064908] gic_handle_irq+0x58/0xb0 [ 47.068581] el0_irq_naked+0x50/0x5c [ 47.072162] [ 47.073665] Allocated by task 328: [ 47.077083] save_stack+0x24/0xb0 [ 47.080410] __kasan_kmalloc.isra.0+0xc0/0xe0 [ 47.084776] kasan_slab_alloc+0x14/0x20 [ 47.088622] kmem_cache_alloc+0x15c/0x468 [ 47.092643] __alloc_skb+0xa4/0x498 [ 47.096142] igmpv3_newpack+0x158/0xd78 [ 47.099987] add_grhead+0x210/0x288 [ 47.103485] add_grec+0x6b0/0xb70 [ 47.106811] igmpv3_send_cr+0x2e0/0x6b8 [ 47.110657] igmp_ifc_timer_expire+0x4c/0x118 [ 47.115027] call_timer_fn+0x1cc/0xbe8 [ 47.118785] __run_timers+0x4d8/0xb28 [ 47.122457] run_timer_softirq+0x24/0x40 [ 47.126389] __do_softirq+0x2c0/0x117c [ 47.130142] [ 47.131643] Freed by task 180: [ 47.134712] save_stack+0x24/0xb0 [ 47.138041] __kasan_slab_free+0x108/0x180 [ 47.142146] kasan_slab_free+0x10/0x18 [ 47.145904] slab_free_freelist_hook+0xa4/0x1b0 [ 47.150444] kmem_cache_free+0x8c/0x528 [ 47.154292] kfree_skbmem+0x94/0x108 [ 47.157880] consume_skb+0x10c/0x5a8 [ 47.161466] __dev_kfree_skb_any+0x88/0xa0 [ 47.165598] brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil] [ 47.171023] brcmf_txfinalize+0xec/0x190 [brcmfmac] [ 47.176016] brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac] [ 47.182056] brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac] [ 47.187568] brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac] [ 47.192529] brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac] [ 47.197859] process_one_work+0x7fc/0x1a80 [ 47.201965] worker_thread+0x31c/0xc40 [ 47.205726] kthread+0x2d8/0x370 [ 47.208967] ret_from_fork+0x10/0x18 [ 47.212546] [ 47.214051] The buggy address belongs to the object at ffffff803f588280 [ 47.214051] which belongs to the cache skbuff_head_cache of size 208 [ 47.227086] The buggy address is located 104 bytes inside of [ 47.227086] 208-byte region [ffffff803f588280, ffffff803f588350) [ 47.238814] The buggy address belongs to the page: [ 47.243618] page:ffffffff00dd6200 refcount:1 mapcou ---truncated---
| Software | From | Fixed in |
|---|---|---|
| linux / linux_kernel | - | 4.14.296 |
| linux / linux_kernel | 4.15 | 4.19.262 |
| linux / linux_kernel | 4.20 | 5.4.220 |
| linux / linux_kernel | 5.5 | 5.10.150 |
| linux / linux_kernel | 5.11 | 5.15.75 |
| linux / linux_kernel | 5.16 | 5.19.17 |
| linux / linux_kernel | 6.0 | 6.0.3 |
- https://git.kernel.org/stable/c/1613a7b24f1a7467cb727ba3ec77c9a808383560
- https://git.kernel.org/stable/c/232d59eca07f6ea27307022a33d226aff373bd02
- https://git.kernel.org/stable/c/27574a3f421c3a1694d0207f37c6bbf23d66978e
- https://git.kernel.org/stable/c/3f42faf6db431e04bf942d2ebe3ae88975723478
- https://git.kernel.org/stable/c/49c742afd60f552fce7799287080db02bffe1db2
- https://git.kernel.org/stable/c/c369836cff98d3877f98c98e15c0151462812d96
- https://git.kernel.org/stable/c/d79f4d903e14dde822c60b5fd3bedc5a289d25df
- https://git.kernel.org/stable/c/e01d96494a9de0f48b1167f0494f6d929fa773ed
Deep Security Visibility Without the Complexity
SynScan provides clear, real-time security insights so you can monitor your attack surface, spot risks early, and act fast—without extra complexity.
- No setup fees
- 5-min deployment
- Cancel anytime
Frequently Asked Questions
A security vulnerability is a weakness in software, hardware, or configuration that can be exploited to compromise confidentiality, integrity, or availability. Many vulnerabilities are tracked as CVEs (Common Vulnerabilities and Exposures), which provide a standardized identifier so teams can coordinate patching, mitigation, and risk assessment across tools and vendors.
CVSS (Common Vulnerability Scoring System) estimates technical severity, but it doesn't automatically equal business risk. Prioritize using context like internet exposure, affected asset criticality, known exploitation (proof-of-concept or in-the-wild), and whether compensating controls exist. A "Medium" CVSS on an exposed, production system can be more urgent than a "Critical" on an isolated, non-production host.
A vulnerability is the underlying weakness. An exploit is the method or code used to take advantage of it. A zero-day is a vulnerability that is unknown to the vendor or has no publicly available fix when attackers begin using it. In practice, risk increases sharply when exploitation becomes reliable or widespread.
Recurring findings usually come from incomplete Asset Discovery, inconsistent patch management, inherited images, and configuration drift. In modern environments, you also need to watch the software supply chain: dependencies, containers, build pipelines, and third-party services can reintroduce the same weakness even after you patch a single host. Unknown or unmanaged assets (often called Shadow IT) are a common reason the same issues resurface.
Use a simple, repeatable triage model: focus first on externally exposed assets, high-value systems (identity, VPN, email, production), vulnerabilities with known exploits, and issues that enable remote code execution or privilege escalation. Then enforce patch SLAs and track progress using consistent metrics so remediation is steady, not reactive.
SynScan combines attack surface monitoring and continuous security auditing to keep your inventory current, flag high-impact vulnerabilities early, and help you turn raw findings into a practical remediation plan.