CVE-2024-35973 — linux / linux_kernel
Use of Uninitialized ResourceIn the Linux kernel, the following vulnerability has been resolved:
geneve: fix header validation in geneve[6]_xmit_skb
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this more broadly.
v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
- Only call __vlan_get_protocol() for vlan types.
v2,v3 - Addressed Sabrina comments on v1 and v2
[1]
BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
| Software | From | Fixed in |
|---|---|---|
| linux / linux_kernel | 6.9-rc3 | 6.9-rc3.x |
| linux / linux_kernel | 6.9-rc1 | 6.9-rc1.x |
| linux / linux_kernel | 6.9-rc2 | 6.9-rc2.x |
| linux / linux_kernel | 5.16 | 6.1.87 |
| linux / linux_kernel | 6.2 | 6.6.28 |
| linux / linux_kernel | 6.7 | 6.8.7 |
| linux / linux_kernel | 4.19.191 | 4.19.313 |
| linux / linux_kernel | 5.4.119 | 5.4.275 |
| linux / linux_kernel | 5.10.37 | 5.10.216 |
| linux / linux_kernel | 5.11.21 | 5.12 |
| linux / linux_kernel | 5.12.4 | 5.15.156 |
| debian / debian_linux | 10.0 | 10.0.x |
- https://cert-portal.siemens.com/productcert/html/ssa-265688.html
- https://cert-portal.siemens.com/productcert/html/ssa-613116.html
- https://git.kernel.org/stable/c/10204df9beda4978bd1d0c2db0d8375bfb03b915
- https://git.kernel.org/stable/c/190d9efa5773f26d6f334b1b8be282c4fa13fd5e
- https://git.kernel.org/stable/c/357163fff3a6e48fe74745425a32071ec9caf852
- https://git.kernel.org/stable/c/3c1ae6de74e3d2d6333d29a2d3e13e6094596c79
- https://git.kernel.org/stable/c/43be590456e1f3566054ce78ae2dbb68cbe1a536
- https://git.kernel.org/stable/c/4a1b65d1e55d53b397cb27014208be1e04172670
- https://git.kernel.org/stable/c/d3adf11d7993518a39bd02b383cfe657ccc0023c
- https://git.kernel.org/stable/c/d8a6213d70accb403b82924a1c229e733433a5ef
- https://lists.debian.org/debian-lts-announce/2024/06/msg00017.html
- https://lists.debian.org/debian-lts-announce/2024/06/msg00020.html
Deep Security Visibility Without the Complexity
SynScan provides clear, real-time security insights so you can monitor your attack surface, spot risks early, and act fast—without extra complexity.
- No setup fees
- 5-min deployment
- Cancel anytime
Frequently Asked Questions
A security vulnerability is a weakness in software, hardware, or configuration that can be exploited to compromise confidentiality, integrity, or availability. Many vulnerabilities are tracked as CVEs (Common Vulnerabilities and Exposures), which provide a standardized identifier so teams can coordinate patching, mitigation, and risk assessment across tools and vendors.
CVSS (Common Vulnerability Scoring System) estimates technical severity, but it doesn't automatically equal business risk. Prioritize using context like internet exposure, affected asset criticality, known exploitation (proof-of-concept or in-the-wild), and whether compensating controls exist. A "Medium" CVSS on an exposed, production system can be more urgent than a "Critical" on an isolated, non-production host.
A vulnerability is the underlying weakness. An exploit is the method or code used to take advantage of it. A zero-day is a vulnerability that is unknown to the vendor or has no publicly available fix when attackers begin using it. In practice, risk increases sharply when exploitation becomes reliable or widespread.
Recurring findings usually come from incomplete Asset Discovery, inconsistent patch management, inherited images, and configuration drift. In modern environments, you also need to watch the software supply chain: dependencies, containers, build pipelines, and third-party services can reintroduce the same weakness even after you patch a single host. Unknown or unmanaged assets (often called Shadow IT) are a common reason the same issues resurface.
Use a simple, repeatable triage model: focus first on externally exposed assets, high-value systems (identity, VPN, email, production), vulnerabilities with known exploits, and issues that enable remote code execution or privilege escalation. Then enforce patch SLAs and track progress using consistent metrics so remediation is steady, not reactive.
SynScan combines attack surface monitoring and continuous security auditing to keep your inventory current, flag high-impact vulnerabilities early, and help you turn raw findings into a practical remediation plan.