How should we interpret CVSS severity scores?

CVSS estimates technical severity, but it does not automatically equal business risk. Prioritize using context like internet exposure, asset criticality, known exploitation, and whether compensating controls exist. A Medium CVSS on an exposed production system can be more urgent than a Critical on an isolated non-production host.

Vulnerability Database

Q: What is a Vulnerability (CVE) and why does it matter?

A security vulnerability is a weakness in software, hardware, or configuration that can be exploited to compromise confidentiality, integrity, or availability. Many vulnerabilities are tracked as CVEs (Common Vulnerabilities and Exposures), which provide a standardized identifier so teams can coordinate patching, mitigation, and risk assessment across tools and vendors.

Q: What's the difference between a vulnerability, an exploit, and a zero-day?

A vulnerability is the underlying weakness. An exploit is the method or code used to take advantage of it. A zero-day is a vulnerability that is unknown to the vendor or has no publicly available fix when attackers begin using it. Risk increases sharply when exploitation becomes reliable or widespread.

Q: Why do vulnerabilities keep reappearing in our environment?

Recurring findings usually come from incomplete asset discovery, inconsistent patch management, inherited images, and configuration drift. In modern environments, you also need to watch the software supply chain: dependencies, containers, build pipelines, and third-party services can reintroduce the same weakness even after you patch a single host.

Q: How do we prioritize remediation without burning out the team?

Use a repeatable triage model: focus first on externally exposed assets, high-value systems (identity, VPN, email, production), vulnerabilities with known exploits, and issues that enable remote code execution or privilege escalation. Then enforce patch SLAs and track progress so remediation is steady, not reactive.

Q: How can SynScan help reduce vulnerability risk over time?

SynScan combines attack surface monitoring and continuous security auditing to keep your inventory current, flag high-impact vulnerabilities early, and help you turn raw findings into a practical remediation plan.

383,211

Total vulnerabilities in the database

CVE-2026-81001

In the Linux kernel, the following vulnerability has been resolved:

slip: fix use-after-free in sl_sync()

slip_devs[] stores bare net_device pointers and takes no reference on them. sl_sync() and sl_alloc() walk that table from slip_open() under rtnl_lock(), while an entry is dropped by sl_free_netdev(), which sl_setup() installs as dev->priv_destructor.

priv_destructor is called from netdev_run_todo(), which deliberately runs with the RTNL semaphore released so that it can sleep while waiting for the device refcount to drop:

/* Snapshot list, allow later requests */
list_replace_init(&amp;net_todo_list, &amp;list);

__rtnl_unlock();
...
	if (dev-&gt;priv_destructor)
		dev-&gt;priv_destructor(dev);	/* slip_devs[i] = NULL */
	if (dev-&gt;needs_free_netdev)
		free_netdev(dev);
	...
	/* Free network device */
	kobject_put(&amp;dev-&gt;dev.kobj);

So rtnl_lock() does not serialise slip_open() against the teardown at all. sl_sync() can load slip_devs[i] while the entry is still published and dereference it after netdev_run_todo() has run the destructor and released the device:

CPU0 (slip_open) CPU1 (slip_close) unregister_netdev() rtnl_unlock() netdev_run_todo() __rtnl_unlock() rtnl_lock() sl_sync() dev = slip_devs[i] priv_destructor(dev) slip_devs[i] = NULL kobject_put(&dev->dev.kobj) /* dev is freed / sl = netdev_priv(dev) if (sl->tty || sl->leased) / use-after-free */

BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline] BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506

CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: sl_sync drivers/net/slip/slip.c:730 [inline] slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564 tiocsetd drivers/tty/tty_io.c:2428 [inline] tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712

Allocated by task 6502: alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719 sl_alloc drivers/net/slip/slip.c:756 [inline] slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564

Freed by task 6497: device_release+0xa2/0x240 drivers/base/core.c:2507 kobject_put+0x179/0x280 lib/kobject.c:729 netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509 slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906 tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456 tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614 tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782 tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860

Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed a different source of stale entries - a device left in slip_devs[] after slip_open() freed it on the registration error path - and does not address this race, which is why the report survives it.

Drop the entry from ndo_uninit instead. unregister_netdevice() calls ndo_uninit under RTNL, before the device is queued to netdev_run_todo(), so an entry that sl_sync() can still see while holding RTNL belongs to a device that cannot be freed until RTNL is dropped. sl_free_netdev() stays only for the slip_open() error path, where register_netdevice() may have failed before ndo_init and ndo_uninit is then not called either. Both running for the same device is harmless: the ---truncated---

Published: Sep 11, 2026
Updated: Sep 12, 2026
CVE: CVE-2026-81001
Exploit:
CISA KEV:

No technical information available.

No CWE or OWASP classifications available.

Affected Software
References

No affected software listed.

Deep Security Visibility Without the Complexity

SynScan provides clear, real-time security insights so you can monitor your attack surface, spot risks early, and act fast—without extra complexity.

No setup fees
5-min deployment
Cancel anytime

Book a Demo

Frequently Asked Questions

What is a Vulnerability (CVE) and why does it matter?

A security vulnerability is a weakness in software, hardware, or configuration that can be exploited to compromise confidentiality, integrity, or availability. Many vulnerabilities are tracked as CVEs (Common Vulnerabilities and Exposures), which provide a standardized identifier so teams can coordinate patching, mitigation, and risk assessment across tools and vendors.

CVSS (Common Vulnerability Scoring System) estimates technical severity, but it doesn't automatically equal business risk. Prioritize using context like internet exposure, affected asset criticality, known exploitation (proof-of-concept or in-the-wild), and whether compensating controls exist. A "Medium" CVSS on an exposed, production system can be more urgent than a "Critical" on an isolated, non-production host.

A vulnerability is the underlying weakness. An exploit is the method or code used to take advantage of it. A zero-day is a vulnerability that is unknown to the vendor or has no publicly available fix when attackers begin using it. In practice, risk increases sharply when exploitation becomes reliable or widespread.

Recurring findings usually come from incomplete Asset Discovery, inconsistent patch management, inherited images, and configuration drift. In modern environments, you also need to watch the software supply chain: dependencies, containers, build pipelines, and third-party services can reintroduce the same weakness even after you patch a single host. Unknown or unmanaged assets (often called Shadow IT) are a common reason the same issues resurface.

Use a simple, repeatable triage model: focus first on externally exposed assets, high-value systems (identity, VPN, email, production), vulnerabilities with known exploits, and issues that enable remote code execution or privilege escalation. Then enforce patch SLAs and track progress using consistent metrics so remediation is steady, not reactive.

SynScan combines attack surface monitoring and continuous security auditing to keep your inventory current, flag high-impact vulnerabilities early, and help you turn raw findings into a practical remediation plan.